ELASTOMERS ABRASION TESTER DVT DA 6 DVT DA 6
Abrasion testing is for determining the rate of abrasion in elastomers.
INDUSTRIAL SECTORS OF USE
TECHNICAL INFORMATION
- Cylinder diameter : 150 mm
- Cylinder length : 500 mm
- Speed of drum : 40± 1 rev. /min.
- Abrasion pressure : 5N (510 gr±0,2) ve 10N (1020 gr±0,2 )
- Test sample diameter: 16 mm
- Progress step : 4,2 mm
- Max. experiment stroke: 40±0, 2 meter.
- By using electronic stroke metering unit, test can be stopped at required distance.
- Unit automatically stops at pre selected distance.
- Death end feature stops the unit in any case.
- Abrasive size : 400x500 mm
- Regulated Operation Voltage: 50 Hz 220 Volt 180-240 AC
- Unit is equipped with TAG switch system.
- Grounded Plug – fuse protected
- Electrostatic powder paint is used.
- Unit has an easy-to-use sample holder clamp.
- Sample Holder with rotary heat.
OPTIONAL ADDITIONALS
- Dust absorbent unit.
- Metal-wear model with various mass and clamps
- Special sample holders
- Calibrated sandpaper can be attached.
- Etalon calibrated rubber.
ACCESSORIES
- Sample cutting punch.
- Dust collector tray.
- Instruction manual
- Power cable
- None calibrated abrasive.
APPROXIMATE DIMENSIONS AND WEIGHT
- Width :80 cm.
- Depth :35 cm.
- Height : 37 cm.
- Weight :55 kg
TECHNICAL DOCUMENTATION
RELEVANT STANDARDS
- ISO 4649
- ISO 20344
- DIN 53516
- TS EN ISO 12947 / 20344
- TS 11007/5548
- ISO 20871
- ASTM D 5963
ADDITIONAL INFORMATION
The Elastomers Abrasion Tester is designed to accurately evaluate the abrasion resistance of elastomeric materials. Equipped with a 150 mm diameter and 500 mm length drum, the device operates at 40±1 rev/min and applies an abrasion pressure of either 5N or 10N. It accommodates 16 mm test samples with a 4.2 mm progress step and allows testing up to a maximum stroke of 40±0.2 meters. Its electronic stroke metering unit ensures precise test control, automatically stopping at a pre-set distance. The TAG switch system, grounded plug, and fuse protection provide operational safety, while the 400x500 mm abrasive sheet ensures uniform wear conditions. The tester is ISO 4649, DIN 53516, ASTM D 5963 compliant, making it suitable for various industrial applications. Optional features such as dust extraction, special clamps, and calibrated abrasives further enhance its versatility and performance in standardized testing environments.