PRODUCT VIDEO WATCH
LEAK TESTER DVT VK EP DVT VK EP
Leakage tester is designed for the leakage tests of packages for food, drugs, medical instruments, electronic components, stationeries and other industrial products.Leakage test is performed in vacuum environment.
INDUSTRIAL SECTORS OF USE
TECHNICAL INFORMATION
- Vacuum value is read on digital display.
- Test period is read on digital display.
- Test period is pre-entered. Audible warning at the end of the test.
- Test duration: between 1-99 min.
- Easy to use.
- Deformation under vacuum, observed by the transparent cabin.
- Vacuum, up to -500 mbar.
- Suitable for water or air environment tests.
- Reservoir with customized dimensions available on an optional basis.
- Operation voltage: 220 V 50 Hz.
- Does not require air input for operation.
- Model with vacuum pump.
INDUSTRIES OF APPLICATION
- Bottle and cap manufacturers.
- Vacuumed box and foil manufacturers.
- Food manufacturers.
OPTIONAL ADDITIONS
| Square reservoir |
| Width x Depth x Height, cm | 37 x 37 x 31 |
| Volume, liter | 42 |
| Cylinder reservoir | Model with small reservoir | Model with big reservoir |
| Inner diameter, cm | 23 | 23 |
| Inner height, cm | 19 | 23 |
| Volume, liter | 8 | 14 |
APPROXIMATE DIMENSIONS AND WEIGHT
- Width : 500 mm.
- Depth : 600 mm.
- Height : 680 mm.
- Weight : 31 kg.
TECHNICAL DOCUMENTATION
RELEVANT STANDARDS
- ASTM D3078
- GB/T 15171
- ASTM D4991
- ASTM D6653
ADDITIONAL INFORMATION
The leak test device operates with a vacuum capacity of -500 mbar and supports a test duration ranging from 1 to 99 minutes, powered by 220 V 50 Hz. It complies with ASTM D3078, GB/T 15171, ASTM D4991, and ASTM D6653 standards. The transparent cabin allows observation of deformations under vacuum. Tests can be conducted in water or air environments. The vacuum pump model does not require external air input and can be produced with square or cylindrical reservoirs in different volumes.
