WIRE AND CABLE THERMAL STABILITY TESTER DVT YIK

TECHNICAL INFORMATION

• 15 samples can be tested simultaneously in digital  display tester
• Operating voltage: 220VAC, 50 Hz
• Power consumption: max. 1500 Watt
• Test tube dimensions Inner diameter:4mm, Outer length:110mm, Outer diameter:5,5mm.
• Test temperature range 200°C ± 5°C
• Temperature display resolution 0,1°C
• Maximum temperature setting 250°C
• Tester type: oil free dry type device
• Overheating protection system PID electronic control system
• Allowable ambient temperature (+20°C) (+30°C)
• Allowable relative humidity %70 , without condensation
• Test block: aluminium body
• PT100 PRT sensor compatibility 0,1°C
• Time display: hour: minute: second
• Beep upon expiration of period
• Approximate dimensions of tester (W*D*H) 35*26*21 cm
• Approximate weight of tester 6 kg
• Approximate dimensions of packaged tester (W*D*H) 45*36*41 cm
• Approximate weight of packaged tester 12 kg

INDUSTRIES OF APPLICATION

• Cable manufacturing
• Plastics, rubber raw materials manufacturing

TESTS PERFORMED WITH THE DEVICE

Thermal stability tests for plastic raw materials, cable insulations and cable sheaths

PRODUCTS SUBJECT TO TESTING

• Cables
• Plastics, car industry and car industry suppliers

TECHNICAL DOCUMENTATION

Specification Sheet 

RELEVANT STANDARDS

• TS 7423 EN 60811-3-2

ADDITIONAL INFORMATION

The Wire and cable thermal stability tester complies with TS 7423 EN 60811-3-2. Operates at 220VAC with a maximum power consumption of 1500 Watt. Up to 15 samples can be tested simultaneously. The test temperature is 200°C ± 5°C, with a maximum setting of 250°C. Temperature resolution is 0.1°C. Compatible with PT100 PRT sensors. Equipped with an aluminum test block and PID electronic control for overheating protection. Time display format is hour:minute:second. Approximate device dimensions are 35×26×21 cm, and 45×36×41 cm when packaged. Weight is 6 kg (device) and 12 kg (packaged).