INSULATION THERMAL STABILITY TESTER DVT YIK

TECHNICAL INFORMATION

• 15 samples can be tested simultaneously in digital  display tester
• Operating voltage: 220VAC, 50 Hz
• Power consumption: max. 1500 Watt
• Test tube dimensions Inner diameter:4mm, Outer length:110mm, Outer diameter:5,5mm.
• Test temperature range 200°C ± 5°C
• Temperature display resolution 0,1°C
• Maximum temperature setting 250°C
• Tester type: oil free dry type device
• Overheating protection system PID electronic control system
• Allowable ambient temperature (+20°C) (+30°C)
• Allowable relative humidity %70 , without condensation
• Test block: aluminium body
• PT100 PRT sensor compatibility 0,1°C
• Time display: hour: minute: second
• Beep upon expiration of period
• Approximate dimensions of tester (W*D*H) 35*26*21 cm
• Approximate weight of tester 6 kg
• Approximate dimensions of packaged tester (W*D*H) 45*36*41 cm
• Approximate weight of packaged tester 12 kg

INDUSTRIES OF APPLICATION

• Cable manufacturing
• Plastics, rubber raw materials manufacturing

TESTS PERFORMED WITH THE DEVICE

Thermal stability tests for plastic raw materials, cable insulations and cable sheaths

PRODUCTS SUBJECT TO TESTING

• Cables
• Plastics, car industry and car industry suppliers

TECHNICAL DOCUMENTATION

Specification Sheet 

RELEVANT STANDARDS

• TS 7423 EN 60811-3-2

ADDITIONAL INFORMATION

The insulation thermal stability tester, compliant with TS 7423 EN 60811-3-2, is used for pH determination and thermal stability testing of electrical cable sheaths, plastic, and rubber raw materials. It supports 15 samples, operates at 220VAC, with 1500 Watt max power, and has a PID control system. The device includes a PT100 PRT sensor, 0.1°C resolution, and an aluminium test block. Max temperature is 250°C, with an oil-free dry type structure and audible alert for test completion.