PRODUCT VIDEO WATCH
(R) MOVING DIE RHEOMETER ZGT M 3000AU ZGT M 3000AU
The ZGT M 3000AU moving mold rheometer is a precision moving mold rheometer with sealed biconical molds. It is an ideal instrument for quality control, research and development to determine the cure properties of rubber compounds, including baking time, cure time, cure speed, maximum torque, minimum torque and other vulcanization properties. Using high-precision temperature control system, advanced amplifier with high-speed sampling rate and PC-based dedicated software, ZGT M 3000AU provides a reliable and easy-to-use solution for the analysis of vulcanization curve.
Используется в
TECHNICAL INFORMATION
- Die configuration: Sealed die
- Test mode: MDR
- Temperature Control: PID control
- Temperature range: Room temperature to 200°C
- Temperature display resolution: 0.1°C
- Temperature control stability: ±0.1°C
- Over-temperature Control: ≤Set value ±0.4°C
- Temperature recovery time: ≤45 sec
- Temperature heating rate: Room temperature to 190°C < 6 min
- Torque range: 200 dN-m
- Torque display resolution: 0.001 dN-m
- Torque unit: dN-m, kgf-cm, lbf-in
- Oscillating angle: ±0.5° (optional ±1.0°, ±2.0°)
- Oscillating frequency: 1.67 Hz ±0.01 Hz
- Controller: U70
- Software: Evolution
- Communication interface: RJ45
- Motor: Brushless DC motor
- Compressed air: 3.5 kg/cm2 (0.35 MPa)
- Power supply: 1 ∮, 220 V, 50/60 Hz, 2 kW (or specify)
STANDARDS
- GB/T 16584-1995
- ISO 6502-3-2018
- ASTM D5289-2017
APPROXIMATE DIMENSIONS AND WEIGHT
- Width, cm : 70
- Depth, cm : 85
- Height, cm : 130
- Weight, kg : 220
