COMPUTERİZED VICAT / HDT TESTER ZGT HV 2000A C6

COMPUTERİZED VICAT / HDT TESTER ZGT HV 2000A C6 ZGT HV 2000A C6

This machine is designed for determining the heat deflection temperature (HDT) of the plastic samples (The temperature at which the plastic sample is bended at 3 points under a specified load.), and the VICAT softening temperature of the plastic samples (The temperature at which the plastic sample is penetrated by a needle under specified load.).

This machine can be cooled by either the compressor or the water cooling system. The use of the compressor can effectively and rapidly reduce the temperature, and save water used for the water cooling system. All metals immersed in heat transfer oil at high temperature are the alloy steels with low coefficient of deformation, so it can minimize the material deformation at high temperature and improve the accuracy of the test result. It is characterized by heating, cooling, controlling stir automatically and displaying the temperature at the measured point automatically.

USED IN

Technical information

  • Sampling :6 sets
  • Deformation display :LVDT, Computer system display
  • Deformation accuracy :<±0.03 % F.S
  • Testing method:HDT/VICAT
  • Temp. range:20°C~300°C ( compressor cooling)Room temp.~300°C (water cooling)
  • Temp. accuracy :±0.5 °C
  • Temperature sensor resolution:0.1 °C
  • Increasing rate of temperature:2 ± 0.2°C / min. or 50 ± 5°C / hr
  • Cooling method :Water cooling / compressor cooling (optional)
  • Power:1∮, AC220V, 50/60Hz, 25A (specified by user)

Approximate dimensions and weight

  • Width : 148 cm
  • Depth : 81 cm
  • Height : 170 cm
  • Weight : 490 kg

Documents

Specification Sheet 

RELEVANT STANDARDS

  • ASTM-D648  
  • JIS-K7191   
  • ISO-2507   
  • GB/T 8802